Compression Fittings for Beverage Tubing - Secure and Leak-Proof

Tubing

Braided Beverage tubing

Polyethylene Tubing

Copper Tubing

Pex Tubing

Oetiker Clamps

John Guest Tubing
--Linear Low Density Polyethylene
--Manufactured by John Guest

Part Number	O D	I D	Roll	Color	Cost
PE-43-1-BLUE*	1/4”	.170”	100’	Blue	$ 11.66
PE-64-1-BLUE*	3/8	1/4	100’	Blue	27.32
PE-43-5-BLUE*	1/4”	.170”	500’	Blue	45.61
PE-64-5-BLUE*	3/8	1/4	500’	Blue	110.29
PE-86-250-BLUE*	1/2	3/8	250’	Blue	76.75
*change pn to NATURAL, WHITE, BLACK where desired color applies
- - Colors available by special order: red, orange, violet, green, yellow
- - OD Sizes available by special order: 5/16”, 1/2 Metric 4,6,8,10,12mm

Generic no name Polyethylene COLD WATER TUBING
--No Printing

Part No.	Max Pressure	I.D.	O.D.	Roll	Color	Cost
EPE-43	120 psi	.170	1/4	100ft	Natural	$ 4.75
EPE-43-5	120	.170	1/4	500	Natural	18.90
EPE-64-B	120	.250	3/8	100	Black	10.90
EPE-64	120	.250	3/8	100	Natural	10.90
EPE-64-5	120	.250	3/8	500	Natural	40.00
EPE-86	110	.375	1/2	100	Natural	17.00
EPE-108	100	.50	5/8	100	Natural	18.00
EPE-1210	100	.625	3/4	100	Natural	20.00
**due to defaulty to trace generic tubing back to the correct manufacturer, economy tubing carries only a 30 day warrenty , For cold water use only.

Pex Water Tubing
- - Cross-linked Polyethylene

Part No	Max Press.	Insert pn	I.D x O.D	Roll	Color	Cost
PEX-6-100	160psi	63PT-5-62	.200 3/8	100’	Orange	$ 44.80
PEX-6-100W	“	63PT-5-62	.200 3/8	100’	White	41.60
PEX-8-100	150pai	63PT-7-62	.350 1/2	100’	Orange	38.09
**When using PEX with John Guest fittings: scratches on the outside of PEX tubing may not allow the fitting to seal properly. Inspect the seal surface of the tubing prior to installation of fitting.

Braided Beverage Tubing

Part No.	Pressure at 70 degF	I D x O D	Clamp	Roll	Line	Cost
	Vinyl-base	Braided tubing with red tracer
3150-04	250 psi	.250”.438”	0123	100’	Red	$ 48.60
3150-04-300				300’		145.80
3150-06	225 psi	.375”.594”	0157	100’	Red	68.85
3150-06-300				300’		206.55
3150-08	225 “	.500 .750	0198	100’	Red	86.10
3150-08-300				300’		224.00
Vinyl-based (heavy wall) with BLue tracer
3130-04	350 psi	.250 .500	0133	100’	Blue	$ 65.00
3130-04-300			300’		Blue	190.35
3130-06	275 psi	.375” .625”	0170	100’	Blue	90.45
3130-06-300				300’	Blue	271.35
Polyethylene Braided with BLue tracer
3160-04	250 psi	.265 .457	0123	100’	Blue	32.21
3160-04-500				500’		148.66
3160-06	“	.375 .635	0170	100’	Blue	47.68
3160-06-300				300’		143.04

Stainless steel Worm Gear clamps

	Closed	Open
M4P	7/32”	5/8”	$ .54
M6P	3/8	7/8	.69
M12P	3/4	1.25	.8

Copper Tubing(50 foot coils)

	O.D.	Cost
CRT-4	1/4”	$ 66.30
CRT-6	3/8	79.64
CRT-8	1/2	92.40

Clear / Soft Vinyl Tubing

Part No.	I.D.	O.D.	Roll	Cost
BV-5007	1/4	3/8	100’	$ 16.60
BV-5008	1/4	7/16	100’	31.17
BV-5011	5/16	1/2	100’	39.00
BV-5012	5/16	9/16	100’	39.72
BV-5014	3/8	1/2	100’	40.00
BV-5015	3/8	9/16	100’	55.00
BV-5016 (BIB)	3/8	5/8	100’	70.87
BV-5020	1/2	5/8	100’	43.00
BV-5028	5/8	13/16	100’	68.15
BV-5029	5/8	7/8	100’	75.40
BV-5034	3/4	1”	100’	90.63
BV-5040	1”	1.25”	100’	117.45
BV-5135	1”	1.20”	100	118.00

Clips for Tubing

		Color	Cost
CL-4N	1/4”	Natural	$ .10
CL-4B	1/4	Black	.03
CL-4B	1/4”	Black	.10
CL-6N	3/8	Natural	.11
CL-6B	3/8	Black	.11
CL-8	1/2	Natural	.12
CL-43N with nail	1/4”	Natural	.06
CL-43B with nail	1/4	Black	.06
CL-64N with nail	3/8	Natural	.08
CL-64B with nail	3/8	Black	.08

Stainless steel Worm ear clamps

	Close	Open
0123	.385”	.484”	$ .16
0133	.425	.524	.17
0145	.472	.571	.19
0157	.520	.618	.19
0170	.571	.669	.20
0185	.602	.728	.21
0198	.654	.779	.24