Tubing | Portage Speciality

Braided Beverage tubing

Polyethylene Tubing

Copper Tubing

Pex Tubing

Oetiker Clamps

Polyethylene COLD WATER TUBING
--Linear Low Density Polyethylene
--Manufactured by John Guest

Part No.	I.D.	O.D.	Roll	Color	Cost
PE-43-1-BLUE*	.170	1/4	100ft	Blue	$ 8.55
PE-64-1-BLUE* 500foot Spools:	.250	3/8	100	Blue	23.91
PE-43-5-BLUE*	.170	1/4	500ft	Blue	35.90
PE-64-5-BLUE*	.250	3/8	500	Blue	79.60
*Change Pn to NATURAL,WHITE,BLACK where desired colors applies
--NSF Standard 51 &61
--Colors available by Special order: red,orange,violet,green,yellow
--CD Size Available by the special order:5/16,1/2
--Matric MM CD Sizes available by the special order: 4,6,8,10,12mm
--For Cold water use only ,Any increases in temperature will reduce the burst and/or the life of the product.
-- Max pressure at 70 deg. F =230PST 150degF =120 PST
Burst pressure are approximately 3 times the working pressure , please note the maximum pressure rating depends on the lowest rated component, eg. most John Guest fitting have a different rating then the tube rating shown above.

Generic no name Polyethylene COLD WATER TUBING
--No Printing

Part No.	Max Pressure	I.D.	O.D.	Roll	Color	Cost
EPE-43	120 psi	.170	1/4	100ft	Natural	$ 4.75
EPE-43-5	120	.170	1/4	500	Natural	18.90
EPE-64-B	120	.250	3/8	100	Black	10.90
EPE-64	120	.250	3/8	100	Natural	10.90
EPE-64-5	120	.250	3/8	500	Natural	40.00
EPE-86	110	.375	1/2	100	Natural	17.00
EPE-108	100	.50	5/8	100	Natural	18.00
EPE-1210	100	.625	3/4	100	Natural	20.00
**due to defaulty to trace generic tubing back to the correct manufacturer, economy tubing carries only a 30 day warrenty , For cold water use only.

PEX HOT WATER TUBING
--Cross-linked Polyethylene

Part No.	Max Pressure	Insert Pn	I.D. X O.D.	Roll	Color	Cost
PEX-6-100	160	63PT-5-62	.200 3/8	100ft	Orange	$ 44.80
PEX-6-100W	160	63PT-5-62	.200 3/8	100	White	41.60
PEX-8-100	150	63PT-7-62	.350 1/2	100	Orange	38.09
**note that when using PEX with John Guest fitting: any scratches on the cut-side of PEX tubing may not allow the fitting to seal properly. Closely inspect the tubing to assure portion of tubing of coming in contact with the fitting is smooth.